DAULEN PPC GF 30 NATURAL

  • PROPERTIES

  • Melt Flow Index (230°C-2,16Kg)

  • Density

  • Tensile Strength at Yield

  • Elongation at Break

  • Flexural Modulus

  • IZOD (Notched at 23°C)

  • HDT 185 N/cm2

  • VICAT 49N

  • Accelerated Ageing 150°C

  • Flammability

  • Speed Combustion

  • TEST METHOD

  • ISO 1133

  • ISO 1183

  • ISO 527

  • ISO 527

  • ISO 178

  • ISO 180

  • ISO 75

  • ISO 306

  • Interno

  • UL 94

  • FMVSS 302

  • UNITS

  • gr/10'

  • gr/cm3

  • MPa

  • %

  • MPa

  • KJ/m2

  • °C

  • °C

  • h

  • MM/MIN

  • VALUE

  • 8

  • 1,13

  • 65

  • 3

  • 5400

  • 20

  • 140

  • 100

  • > 150

  • HB

  • < 100




Molding conditions:
Drying Temperature >= 2 h / 90 -100°C - Molding Temperature 230 - 260°C - Mold Temperature 40-60°C

DAULEN PPC GF 30 NATURAL 30 is a copolymer polypropylene reinforced with 30% of coupled fiber glass for injection mounding , high flow rate. It is suitable for moldings of technical items that need very high impact strength, good stiffness and heat resistance. It is normally used in productions of automotives, households, electrical goods and all parts where high impact strength is required.

Values in this data sheet are only indicative, they aren't product specification, there are indication about possibility of application. We can't forecast every conditions where our information and our product will use, our company doesn't guarantee applicability and fitness for a specificity use, so we declines every responsibility for damage to customer. Dry the material is recommended.