DAUNYL 66 AV NATURAL

  • PROPERTIES

  • Density

  • Water Absorption (23°C - 24h)

  • Mold Shrinkage

  • VICAT B (9,8 N)

  • H.D.T. (1,81MPa)

  • Continuous Use Temperature

  • Tensile Modulus

  • Tensile Strain at Break

  • Tensile Strain at Yield

  • IZOD (Con Intaglio a 23°C)

  • Flammability (1,6 mm - 3,2 mm)

  • Glow Wire Flammability Index (2 mm)

  • Surface Resistivity

  • TEST METHOD

  • ISO 1183

  • ISO 62

  • ISO 2577

  • ISO 306

  • ISO 75-2

  • ISO 527

  • ISO 527

  • ISO 527

  • ISO 180/A

  • UL 94

  • IEC 60695-2-12

  • IEC 60093

  • UNITS

  • g/cm3

  • %

  • %

  • °C

  • °C

  • °C

  • MPa

  • %

  • %

  • KJ/m2

  • °C

  • Ohm

  • VALUE

  • 1,14

  • 1,3

  • 1,3 - 1,8

  • 250

  • 90

  • 90

  • 3300

  • 60

  • 5

  • 5

  • V2

  • 960

  • 1014




Molding conditions:
Drying Temperature >= 3 h / 90 -100°C - Molding Temperature 260 - 280°C - Mold Temperature 70-90°C

DAUNYL 66 AV NATURAL is a polyamide 66 that is suitable for the molding of technical items that they need fast cycles and a good processability.

The information contained herein are supplied in good faith and given purely as an indication. Properties should be carefully evaluated for all projects requirements. Values are referred to moulded samples conditioned for 40h - 23°C - 50% U.R. Unless otherwise posted this product is not suitable for food and/or medical application and use. They shall not be considered in any way as a formal commitment or warranty on our part especially in case of improper use of our products from third parties.