DAUNYL DPN 27 AV NATURALE

  • PROPERTIES

  • Density

  • Water Absorption (23°C - 24h)

  • Mold Shrinkage

  • VICAT B (9,8 N)

  • H.D.T. (1,81MPa)

  • Continuous Use Temperature

  • Tensile Modulus

  • Tensile Strain at Break

  • Tensile Strain at Yield

  • IZOD (Notched Impact Strength 23°C)

  • Flammability (1,6 mm - 3,2 mm)

  • Glow Wire Flammability Index (2 mm)

  • Surface Resistivity

  • TEST METHOD

  • ISO 1183

  • ISO 62

  • ISO 306

  • ISO 75-2

  • IEC 60216

  • ISO 527

  • ISO 527

  • ISO 527

  • ISO 180/A

  • UL 94 (File E209606)

  • IEC 60695-2-12

  • IEC 60093

  • UNITS

  • g/cm3

  • %

  • %

  • °C

  • °C

  • °C

  • MPa

  • MPa

  • %

  • KJ/m2

  • °C

  • Ohm

  • VALUE

  • 1,14

  • 1,8

  • 1,2 - 1,8

  • 205

  • 80

  • 80

  • 2900

  • 70

  • 5

  • 6

  • V2

  • 825

  • 1014




Molding conditions:
Drying Temperature >= 3 h / 90 -100°C - Molding Temperature 230 - 250°C - Mold Temperature 70-90°C

DAUNYL DPN 27 AV NATURAL is a polyamide 6 with a 2,7 viscosity , characterized by an high melt flow and an uniform microcrystalline structure. It is suitable for the injection molding of components requiring fast "set up" time and easy mould release.

The information contained herein are supplied in good faith and given purely as an indication. Properties should be carefully evaluated for all projects requirements. Values are referred to moulded samples conditioned for 40h - 23°C - 50% U.R. Unless otherwise posted this product is not suitable for food and/or medical application and use. They shall not be considered in any way as a formal commitment or warranty on our part especially in case of improper use of our products from third parties.